GEDA FIXLIFT 21M TWO-SPEED INCLINED LIFT

The GEDA FixLift 21 m roofing lift, designed for specialized transport, is used for work in single-family homes, single-story and multi-story buildings, tenement buildings, and lower-rise industrial/commercial buildings. Its 1.2 kW motor not only provides the highest lifting speed of 38 m/min, but also allows materials to be transported at half that speed (19 m/min). It significantly simplifies work wherever time savings and safety are priorities. The undoubted advantages of this winch include: two lifting speeds, which greatly facilitate the vertical transport of less stable loads, and a high speed useful for longer sets.

GEDA FixLift 21 m - technical data:

• Winch load capacity: up to 250 kg / note: the load capacity of the device depends on the inclination, type and number of rail segments,
• Lifting speed: 19/38 m/min,
• Detachable control panel with emergency stop and 5 m cable,
• All GEDA inclined winches can be used up to a 19 m eaves height,
• according to When working with the lift, ensure that at least two coils of rope remain on the drum.
• The winch is assembled directly on the construction site without the use of any tools.
• Lightweight and easy-to-install aluminum guide rails are inserted into each other and secured by hand-tightening the nut.
• The reliable electric drives (230V) automatically shut off when the sled reaches the upper or lower runway points and when the rope is not under tension.
• Electric lift with a power of 0.6/1.2 KW / 230V / 50Hz.

Advantages of the Geda lift:

• two material lifting speeds,
• easy and quick assembly/disassembly (no tools required),
• convenient transport and can be used at any construction site,
• saves time and labor costs,
• possibility of expanding each set,
• wide selection of additional equipment,
• increased work safety.

GEDA FixLift 21 m set equipment:

• electric lift 230V / 50Hz with a drum containing 43 m of 6.0 mm diameter rope,
• detachable with housing, limit switch with 21.0 m cable,
• Controller (24V) detachable from housing, with emergency stop switch, 5.0 m cable,
• Sled with automatic safety brake in case of cable break,
• Top segment with return roller,
• Bottom rail segment 2.0 m with tilting feet and special mounting for the drive unit,
• 2-meter rail segment 250 kg with screws x 9,
• 1-meter rail segment 250 kg with screws x 1,
• Adjustable bend 20-45 degrees. symmetrical,
• universal roofing platform,
• telescopic support for the 5.7 m track,
• telescopic support extension to 7.2 m,
• Operational Manual in Polish.