GEDA-FIXLIFT 250

Geda Fixlift 250 kg features - winch load capacity: up to 250 kg. Note: The load capacity of the device depends on the inclination, type and number of rail segments.
- two lifting speeds: 19 and 38 m/min.
- detachable control panel with emergency stop and 5 m cable.
- all GEDA inclined winches can be used for eaves heights up to 19 m,
- winch assembly takes place directly on the construction site without the use of any tools,
- lightweight and easy-to-install aluminum rails are inserted into each other and secured by manually tightening the nut,
- safe in use electric drives (230V) switch off automatically when the sled reaches the upper or lower runway points and when the rope is not tensioned. Due to its lifting speed and lifting capacity, we recommend this type of drive unit for use in taller buildings. A large reserve of engine power and lifting capacity is perfect for general construction applications. Technical parameters: - lifting speed 19 and 38 m/min, - electric winch with a power of 1.2 kW / 230V / 50Hz. Basic equipment of each set of winches: - electric winch 230V / 50Hz with a drum containing 43 m of rope with a diameter of 6.0 mm - limit switch detachable from the housing with a 21.0 m cable - controller detachable from the housing (24V) with an emergency switch with a 5.0 m cable - sled with an automatic safety brake in the event of a rope break - upper segment with a return roller - lower rail segment 2.0 m with tilting feet and a special mounting for the drive unit Recommended standard equipment allowing you to configure your own Set: - Reinforced rail segments with lengths of 2m, 1m, 0.75m, 0.5m and a load capacity of 250kg - Universal transport platform with opening sides - symmetrical rail bend with smooth angle adjustment from 20° to 45° Additional or replacement equipment with the standard one: - Standard rail segments with lengths of 2m, 1m, 0.75m, 0.5m and a load capacity of 200kg - Vario transport platform with foldable side flaps and adjustable inclination angle - asymmetrical rail bend with smooth angle adjustment from 20° to 45° - roofing trolley for distributing roof tiles on battens (We recommend it!!!) - telescopic rail support with a length of up to 5.7m - rail support extension to the length of 7.4m
- large transport platform with adjustable inclination angle and reinforced with all sides that can be opened
- platform with adjustable side handles from 0.5 to 1.6m for transporting boards, e.g. OSB, plasterboard
- Tilting hopper with tilting mechanism
- running gear for moving the winch
- running wheels for the drive unit
- roof support for rails
- Tilting running sled (used with the hopper for bulk materials and with the platform for transporting boards)
- Transport box (for transporting and storing components of the roofing lift)
- NEW!!! Running wheels with an upper return segment for pulling the set along the wall, 230V power supply
load capacity 250 kg
lifting speed 19/38 m/min