GEDA LIFT FIXLIFT 250KG TWO-SPEED - STARTER

GEDA Fixlift 250 kg Starter.

Starter components:

1. Electric lift 230V / 50Hz with a drum containing 43 m of 6.0 mm diameter rope.
2. Control panel and limit switch detachable.
3. 2 m base segment, upper segment with deflector pulley, sled.

Configuration components:

Rail segments, available sets including the base: 9.5 m, 11.5 m, 13.5 m, 15.5 m, 17.5m, 19.5m, 21.5m.

Symmetrical bend, necessary for moving loads over the eaves onto the roof.

Telescopic support 5.7m, protects the runway from deflection, required for lifts from 11.5m and above.

Support extension 7.4m, required for lifts over 15.5m.

Universal roofing platform, a typical platform for transporting roof tiles, for example.

Vario platform, equipped with adjustable positioning and an additional side.

Roofing trolley, enabling the horizontal distribution of roof tiles across the roof.

Roof support 37-60 cm with rubber roof protection.

Motor wheels, facilitate transporting the motor.

Technical parameters of the motor:

• Winch load capacity: up to 250 kg / note: the load capacity of the device depends on the slope, type and number of rail segments.
• Lifting speed: two-speed 19 and 38 m/min.
• All GEDA inclined winches can be used for eaves height max. 19 m,
• According to the documentation, when operating the lift, ensure that at least two coils of rope remain on the drum.
• Lightweight and easy-to-install aluminum guide rails are inserted into each other and secured by hand-tightening the nut.
• Electric drives (230V) are reliable and automatically shut off when the sled reaches the upper or lower runway points and when the rope is not tensioned.
• Electric lift with a power of 1.2 kW / 230V / 50Hz.
• Operational Manual in Polish.